Foil ea Aluminium ea Hydrophilic

Tlhaloso e Khutšoanyane:

The foil hydrophilic na lera barbotage lintho tse bonahalang, e nang le tshebetso ya ho hanyetsa phahameng ts'enyeho. E ka sebelisoa meahong e fapaneng ea phapanyetsano ea mocheso moo mosebetsi oa mantlha e leng ho fetisa mocheso ka nepo. Hape foil ena e ka sebelisoa bakeng sa evaporator le condenser libakeng tse ngata tsa maemo a moea tsa bolulo, likoloi, le khoebo le li-humidifiers le lisebelisoa tse ling. Re ka hlahisa hydrophilic ka 'mala o moputsoa le khauta


Product Qaqileng

Lihlahisoa tsa Product

Lintlha:
Re hlahisa foil ea Fin Stock aluminium ho tloha ho ingot ho ea ho coil ea aluminium ke Achenbach Foil Rolling Mill e tsoang Jeremane le Kampf Foil Slitter. Bophara bo boholo ke 1800 mm mme botenya ba Min ke 0.006 mm.
Ka theknoloji e tsoetseng pele, re ka hlahisa mefuta eohle ea aluminium Foil ka litekanyetso tse fapaneng joalo ka EN mme re laola mohato o mong le o mong oa tlhahiso mme re shebisisa mohloli o mong le o mong oa thepa e tala.
Re boetse re mofani oa thepa ea mantlha bakeng sa lifeme tsa AC tsa China

Hydrophilic Alumi (3)

Lebitso Foil ea Aluminium ea Hydrophilic
Bohale ba motsoako 8006-O, 8011-O, 8011 H24, 3003 H24
Kakaretso ea botenya 0.10 mm - 0.35mm (mamello: ± 5%)
Bophara le mamello 200- 1500 mm (mamello: ± 1.0mm)
Botenya ba Hydrophilic 2.0 ~ 4.0 um (lehlakoreng le le leng karolelano ea botenya)
Ho khomarela Teko ea Erichson (tobetsa ka ho teba ho 5mm): ha ho eboloa
Teko ea Gridding (100/100): ha ho karohano ea plunger
Ts'enyeho Khanyetso RN ≥ 9.5 Teko ea spray ea letsoai (lihora tse 72)
Khanyetso ea Alkali E kentsoe NaOH ea 20% ka 20 ºC metsotso e 3, ha ho na blister
 Khanyetso ea moimana Disampole boima ba 'mele 0.5%
 Khanyetso ea Mocheso Ka tlasa 200 ºC, metsotso e 5, ts'ebetso le 'mala ha lia fetoha
Tlas'a 300 ºC, bakeng sa metsotso e 5, filimi ea ho roala e ba bosehla bo bonyenyane
Bopaki ba oli Inela ka har'a oli e sa tsitsang lihora tse 24, ha ho na machachetsi filiming e koahelang
Boima ba 'mele 200 - 550kg ka roll coil (kapa e hlophisitsoeng)
Bokaholimo Mill o qetile, Hydrophilic ka 'Mala o moputsoa le oa khauta
Lintho tse bonahalang tsa mantlha Tšepe / aluminium
ID ea mantlha Ф76mm, Ф150mm (± 0.5mm)
Ho paka Fumigation linyeoe tsa lehong tse sa lefelloeng (re tsebise haeba ho na le likopo tse khethehileng)
Tensile Matla (Mpa) > 110MPa (ho latela botenya)
Ho kopanya% 18%
Bofuma Kereiti
Kopo ho pharaletseng sebelisoa ka conditioner moea ba ntlo, sehatsetsi, thepa refrigeration le koloi conditioner moea jj
Nako ea ho fana nakong ea matsatsi a 20 kamora ho fumana peeletso ea mantlha ea LC kapa 30% ka TT

Q1: Re bo-mang?
Karabo: Ha re moetsi le morekisi oa Aluminium feela, empa hape re hlahisa lakane ea aluminium, li-coil tsa aluminium, selikalikoe sa aluminium, 'mala o koahetsoeng ka aluminium le lakane ea aluminium.

Q2: Re fana ka ts'ebeletso e betere joang?     
Karabo:
Re tsepamisa maikutlo holima ntlha e ngoe le e ngoe ea lihlahisoa tsa rona, ho kenyeletsoa taolo ea boleng bo sa tsoakoang, tlhahiso, sephutheloana, ho laisa, ho romella le ho kenya hoa ho qetela Re hlakile hore phoso efe kapa efe e nyane fekthering ea rona e tla lebisa bothateng bo boholo ho bareki ba rona ha ba fihla, ke hore litšila tse tšabehang ka bobeli re le kantle ho moreki, eseng feela litšila bakeng sa thepa, nako, chelete, empa trust, e leng eona ea bohlokoa ka ho fetisisa khoebong ea machabeng
Ka hona, hana che ho phoso efe kapa efe!

Q3: Phapang ke efe ho uena le mohatelli oa hau?
Karabo: Eo ke potso e ntle haholo.
Pele ho tsohle, Ruri re e 'ngoe ea tse ntle ka ho fetisisa' marakeng, ha ke re ke 'na ea tsoang pele, empa ke e mong oa ba molemo ka ho fetisisa. Ha ho motho ea phethahetseng, ho kenyeletsoa le rona. Ntho ea bohlokoa ka ho fetesisa ke hore na o sebetsana le phoso ea hau joang le hore na o ka ntlafatsa joang nakong e tlang mme o ka khotsofatsa bareki ba hau joang ka puseletso. Ho fihlela joale sekhahla sa lihlahisoa tsa rona se tšoanelehang se batla se le 99.85%, ka lebaka la sehlopha sa rona sa tlhahiso ea litsebi le sehlopha sa mahlale. Re nka kopo e ngoe le e ngoe e le monyetla oa ho lekola likarolo tsohle tse ka amang boleng. Ho kenyelletsa tlhahiso, ho paka, ho tsamaisa le ho hlahloba. Ka hona re lula re ntlafatsa palo ena mme ka tsela eo, re hlile re buseletsa bareki ba rona ka chelete mme ho fihlela joale bareki ba rona ba khotsofetse ka botlalo ka rona.

Tiiso ea boleng
Re na le sistimi e tiileng ea taolo ea boleng ho tsoa ho aluminium ingot ho qeta lihlahisoa tsa moqolo oa aluminium, le ho leka lihlahisoa tsohle pele re paka, e le hore re netefatse habeli hore sehlahisoa se tšoanelehang feela e tla ba phano ho bareki kamoo re tsebang leha e le bothata bo fokolang ke rona fekthering ea rona. mohlomong ho lebisa mathateng a maholo ho bareki ha ba fumana .Haeba moreki a hloka, re ka kenya ts'ebetsong tlhahlobo ea SGS le BV ha re hlahisa kapa re kenya

Hydrophilic Alumi (1)

Kopo:

Hydrophilic Alumi (4) Hydrophilic Alumi (2)

 


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa oa hau mona ebe u o romella ho rona